While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards.

New to Version 2:

• Foam interlayer changed from 3/8" to 3/16".
• Redesigned foam interlayer for more effective orange peel removal.
• Redesigned without holes for longer durability.

Features:

• Reduce orange peel and deep defects while simultaneously polishing paint.
• Equivalent to 3000 grit sandpaper without the dulling of paint and sanding haze.
• Reduce orange peel without sanding.
• Orange peel removal without the haze generated by sanding.
• Polish the paint while removing the ridges of orange peel.
• Less dust and clean up prior to finishing polish.

Directions:

• Attach to hook & loop backing plate with rotary polisher for best results.
• Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.
• Begin working polish on low speed for a pass.
• Step up speed to approximately 1100 rpm (adjust as needed).
• With proper lighting observe the level of orange peel removal while you work noting precise surface contact without pressure to level ridges.
• After completing each section wipe off paint with soft microfiber towel.
• Brush pad in direction of fibers to remove residue.
• Apply a couple more drops of polish for next section.
• Switch out pads as needed when cut has been compromised and set aside to clean by hand.

Pad Care:

• Spray cleaning solution on face of pad.
• Brush.
  
• Rinse face of pad.
• Allow to dry before next use.

Precautions:

• Note that these pads are the equivalent of 3000 grit sandpaper.
• Please only use these pads if you are sure the orange peel is in the upper (clear coat) and not the color coat layer
• Be careful near edges and body lines or avoid completely if you are not entirely secure in your knowledge of heavy defect removal.
• Do not use without sufficient skill level.
• PLEASE NOTE: Use NO PRESSURE and observe the paint temperature often.  
• DO NOT USE WITHOUT PAINT GAUGE UNLESS YOU HAVE TAKEN RESPONSIBILITY FOR MOVING FORWARD WITHOUT ONE.