PRECAUTIONS

• Applicable only to smooth leather or leather-replacement surfaces (do NOT apply to suede, alcantara, vegan or synthetic leather).
• Apply when air humidity does not exceed 70%.
• Apply in temperatures above 10°C/50°F degrees. Wear protective gloves. If accidentally applied to non-leather surfaces, clean up immediately as long exposure may cause staining.
• Avoid applying Diamond Leather to bright white leather in convertables as it can cause a greying effect.

WHAT YOU’LL NEED

• 1 Microfiber Towel
• 1 Applicator Pad
• Protective Gloves
• Diamond Body Prep

APPLICATION TIPS

Diamond Leather will absorb easily into the leather. Any excess which remains unabsorbed will haze. Buff the surface with a clean microfiber towel to remove excess product.

INSTRUCTIONS

• Treat with Diamond Body Prep & dry with a microfiber towel.
• Shake Diamond Leather well for 15 seconds and then apply 15 drops to an applicator.
• Apply on 1-2 elements of the car interior in crosshatch fashion.
• Wait 1-3 mins and proceed to polish off excess with a microfiber towel.
• Wait 30 minutes for the coating to fully cure.