PRECAUTIONS

• Apply in temperatures between 10-30°C, 50-90°F.
• Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
• Wear protective gloves.
• Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).

WHAT YOU’LL NEED

• 1 Microfiber Towel
• 1 Applicator Pad
• Protective Gloves
• Diamond Body Prep

APPLICATION TIPS

• If applying in high heat or humidity, lower time between application and removal.
• Test over a small area to determine appropriate time to let the coating bond to the surface.
• Apply to body, headlights, rubber, and metal trim.
• As the coating bonds to the surface a haze will appear. This indicates coating is ready to remove.
• If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.

INSTRUCTIONS

• Wash, polish and treat the car body with Diamond Body Prep.
• Shake DIAMOND BODY bottle thoroughly for 15 seconds.
• Place 15 drops on an applicator.
• Apply to 1-2 elements of the car in a crosshatch fashion.
• Wait 1-3 mins watching for a haze to appear and polish off
  excess with a microfiber towel then buff to a great caramel gloss shine.
• The car is ready to drive away!