PRECAUTIONS

• Apply in temperatures between 10-30°C, 50-90°F.
• Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
• Wear protective gloves. Use fresh applicators & microfiber towels for the application of additional layers (do not use previously used towels).

WHAT YOU’LL NEED

• 1 Microfiber Towel
• 1 Applicator Pad
• Protective Gloves
• Diamond Body Prep

APPLICATION TIPS

• Hand buff after application (do not use machine tool).
• If applied in a hot climate (over 30°C/90°F), lower flashing time.
• As Diamond Wrap's solvent evaporates, the PPF & vinyl surface will haze. This indicates that the WRAP's micropores have absorbed the coating and are ready for buffing to remove excess material.
• Use an additional light source to control your work when polishing treated surfaces.

INSTRUCTIONS

• Wash, dry, then treat the car body with Diamond Body Prep.
• Shake the Diamond WRAP bottle well for 15 seconds.
• Place 8-15 drops on an applicator and apply to 1-2 elements of the car in a crosshatch fashion.
• Wait 1-3 mins for flashing, then polish off the excess with a microfiber towel. Hand buff for a beautiful protective finish. Your car is ready to drive away!