PRECAUTIONS

• Apply in temperatures between 10-30°C, 50-90°F.
• Apply in a closed, well ventilated indoor area with air humidity not exceeding 70%.
• Wear protective gloves.
• Use fresh applicators & microfiber towels for application of additional layers (do not use previously used towels).

WHAT YOU’LL NEED

• 1 Microfiber Towel
• 1 Applicator PadProtective Gloves
• Diamond Body Prep

APPLICATION TIPS

• If applying in high heat or humidity lower time between application and removal.
• Test over a small area to determine appropriate time to let the coating bond to the surface.Apply to body, headlights, rubber, and metal trim.
• As the coating bonds to the surface a haze will appear. This indicates coating is ready to remove.
• If product dries on the surface or is difficult to remove, re-wet the area with more product and immediately buff off.
• If a second layer is desired, allow to cure for 1 hour before application.

INSTRUCTIONS

• Wash, polish and treat the car body with Diamond Body Prep. Shake Diamond Body well for 15 seconds.
• Place 15 drops on an applicator and apply to 1-2 elements of the car in crosshatch fashion.
• Wait 5-10 mins and polish off excess with a microfiber towel then buff to a great caramel gloss shine! The car is ready to drive away!