PRECAUTIONS

• Apply when air humidity does not exceed 70%
• Work with protective gloves
• If accidentally poured on car surface, clean up immediately as long exposure to Diamond Glass can cause damage to car body paint

WHAT YOU’LL NEED

• 1 Microfiber Towel
• 1 Applicator Pad
• Protective Gloves
• Diamond Glass Prep

APPLICATION TIPS

• Do not apply in direct sunlight
  Make sure that the glass surface is not less than 10°C/50°F
• Use only on glass surfaces.
  Diamond Glass may seem to evaporate or leave very little material on the surface – this is to be expected and is part of the product characteristics.
• If application in hot climate (over 30°C/90°F), remove after 5-10 minutes.

INSTRUCTIONS

• Use Diamond Glass Prep to treat the windshield and windows.
• Shake Diamond Glass well for 15 seconds and apply 15 drops to an applicator.
• Proceed to apply to the entire surface in crosshatch fashion. Apply more drops as necessary.
• Wait 10-15 mins and polish off excess with a microfiber towel. The car is ready to drive away!

Recommended yield: 3-5 windshields per bottle.